Configure YiLu proxy IP in Bit fingerprint browser

I. Open the YILU Official Website

Yilu Proxy

Download the YILU Client:

Yilu Proxy Installation Package

Note 1: When downloading or using the Yilu client, be sure to turn off the firewall.

Note 2: Save the Yilu client download on your computer in a location other than the desktop, such as drive D or E.

Note 3: Be sure to extract the installation package in the drive where it was downloaded. Double-click the YiluProxy.exe file to open the Yilu client.

Note 4: For ease of use, you can create a shortcut to the Yilu client on the desktop after extraction.

2.Creating a Yilu Account

a. In the bottom right corner of the Yilu client, select your preferred language. Currently, only Chinese and English are supported. Click to switch between languages as desired.

b. After selecting the language, please click “Create New Account.” In the pop-up window, fill in an email address that can receive SMS messages, a password, and an invitation code (optional). Then, click “Create Account.”

c. After registering for a Yilu account, enter your username (registered email) and password, and click “Secure Login” to begin your “Yilu journey.”

3. Open the YILU client, click on [Program], and add Edge Browser or Google Chrome, etc.
The following example uses adding the Edge browser. There are two methods to add it: Method 1: Drag the Edge browser directly into the software program interface. Move the cursor over the Edge browser program, press and hold the left mouse button, and drag the software directly into the [Program] interface.

Method 2: Click on the “Add Program” button (on the right side) in the [Program] interface of the client, then select the Edge browser software, and finally click “Save.”

4.Settings
① Open the “Settings” page of the YiLu client.
 ② Proxy port: You can choose random or custom.
 ③ Forwarding port: Set the port range according to your needs, for example, between 5500 and 5510. This allows multiple ports to forward simultaneously, with each port able to forward one IP.
④ Listening address: Select 127.0.0.1.
⑤ Use proxy IP for more than 24 hours: Choose according to your needs.
 ⑥ Select “YiLu Portable Proxy Engine.”
 ⑦ Proxy rules: Use the default selection.

Only proxy applications in the YiLu program tab, other traffic through the local network. Intercept UDP non-DNS request data (recommended to check, can prevent browser from leaking the real IP).
⑧ After ensuring steps 1-7 are correct, don’t forget to save the settings.

5.Port Forwarding Method (Applicable to all types of IPs: shared static IP, dedicated static data center IP, dedicated static residential IP, dynamic residential IP, dynamic mobile IP, and dynamic data center IP)
1. In the YILU client, follow these 4 steps: 1. Select the IP type.  2.Choose an IP address. 3. Right-click and select “Forward Port to Proxy.” 4. Choose the required port
Note a: Each port can only be set with one IP address, but you can change the IP for the port at any time.
Note b: After setting, you can view the specific IP information for each port in the “Port Forwarding List.”
Note c: “Used” indicates the port has an assigned IP address, while “free” indicates the port is currently idle and has no assigned IP.

Note d: The setup method for port forwarding is the same for both static and dynamic IPs.

2. Bit Fingerprint Browser Client Settings：

①. Start the Bit Browser, and click “Browser Profiles ” on the left side.
②. Click “Add”.

③. Enter the window name according to your personal needs (please choose whether to fill in the other options based on your personal needs).

④. Scroll down to find “Proxy Settings”, click on “Proxy Type” below, and select HTTP or Socks5.
⑤. Select IP Protocol: IPv4
Fill in Proxy Host: 127.0.0.1
Fill in Port: According to the corresponding port forwarded in YiLu settings (e.g., 5500, 5501, etc.);

Proxy Account: Leave blank; Proxy Password: Leave blank;
Click “Proxy Test” to check if the proxy is connected successfully.
⑥. After the connection shows as successful with a green indicator, click “confirm” to create the window.
Note: If you need to create multiple lines, repeat the above steps accordingly.

6.Username + Password Form (Only applicable to dynamic types of IPs: dynamic residential IP, dynamic mobile IP, and dynamic data center IP. Not applicable to static IP types because they do not have a username and password; therefore, static IPs can only use the port forwarding method.)
1. Select the IP type and click on the “Dynamic Residential IP/Dynamic Mobile IP/Dynamic Data Center IP” option.
2. Choose the desired country, state, and city (Dynamic Data Center IP does not currently support selection of state and city).

3.Select the format for generating the IP，such as “IP:Port:Username:password.Username: password@IP: Port.

4.Specify the number of IPs you want to generate.

5. Click the “Extract” button to obtain the IP information.

6. Copy the generated IP:Port:Username:password，and then paste it into the Bit Browser profile.

①. You can click “Copy to Clipboard” to save the IP information locally for bulk uploading to the Bit browser.
②. You can also extract IP information from the “API Adder: user_get_ip_list” in YiLu’s “Settings” interface.

7. Open the Bit Fingerprint Browser client：

• . Start the Bit Browser and click ” Browser Profiles ” on the left side.
• . Click “Add”.
• .Enter the window name according to your personal needs (for the other options, choose whether to fill them in based on your personal needs).
• .Scroll down to find “Proxy Settings”, click on “Proxy Type” below, and select HTTP or Socks5.
• . Select IP Protocol: IPv4
  Proxy Host:Port: Copy the extracted IP and port.
  Proxy Account: Copy the extracted IP username.
  Proxy Password: Copy the extracted IP password.

Click “Proxy Test” to check if the proxy is connected successfully.
⑥. After the connection shows as successful with a green indicator, click “confirm” to create the window.
Note: If you need to create multiple lines, repeat the above steps accordingly.