Configuring YiLu proxy IP in MuLogin fingerprint browser

I. Open the YILU Official Website

Yilu Proxy

Download the YILU Client:

Yilu Proxy Installation Package

Note 1: When downloading or using the Yilu client, be sure to turn off the firewall.

Note 2: Save the Yilu client download on your computer in a location other than the desktop, such as drive D or E.

Note 3: Be sure to extract the installation package in the drive where it was downloaded. Double-click the YiluProxy.exe file to open the Yilu client.

Note 4: For ease of use, you can create a shortcut to the Yilu client on the desktop after extraction.

2.Creating a Yilu Account
a. In the bottom right corner of the Yilu client, select your preferred language. Currently, only Chinese and English are supported. Click to switch between languages as desired.
b. After selecting the language, please click “Create New Account.” In the pop-up window, fill in an email address that can receive SMS messages, a password, and an invitation code (optional). Then, click “Create Account.”
c. After registering for a Yilu account, enter your username (registered email) and password, and click “Secure Login” to begin your “Yilu journey.”

3.Open the YILU client, click on [Program], and add Edge Browser or Google Chrome, etc.
The following example uses adding the Edge browser. There are two methods to add it: Method 1: Drag the Edge browser directly into the software program interface. Move the cursor over the Edge browser program, press and hold the left mouse button, and drag the software directly into the [Program] interface.

Method 2: Click on the “Add Program” button (on the right side) in the [Program] interface of the client, then select the Edge browser software, and finally click “Save.”

4.Settings
① Open the “Settings” page of the YiLu client.
 ② Proxy port: You can choose random or custom.
 ③ Forwarding port: Set the port range according to your needs, for example, between 5500 and 5510. This allows multiple ports to forward simultaneously, with each port able to forward one IP.
④ Listening address: Select 127.0.0.1.
⑤ Use proxy IP for more than 24 hours: Choose according to your needs.
 ⑥ Select “YiLu Portable Proxy Engine.”
 ⑦ Proxy rules: Use the default selection.

Only proxy applications in the YiLu program tab, other traffic through the local network. Intercept UDP non-DNS request data (recommended to check, can prevent browser from leaking the real IP).
⑧ After ensuring steps 1-7 are correct, don’t forget to save the settings.

5.Port Forwarding Method (Applicable to all types of IPs: shared static IP, dedicated static data center IP, dedicated static residential IP, dynamic residential IP, dynamic mobile IP, and dynamic data center IP)
(1) In the YILU client, follow these 4 steps:

1. Select the IP type.  

2.Choose an IP address.

3. Right-click and select “Forward Port to Proxy.”

4. Choose the required port
Note a: Each port can only be set with one IP address, but you can change the IP for the port at any time.
Note b: After setting, you can view the specific IP information for each port in the “Port Forwarding List.”
Note c: “Used” indicates the port has an assigned IP address, while “free” indicates the port is currently idle and has no assigned IP.
Note d: The setup method for port forwarding is the same for both static and dynamic IPs.

(2)MuLogin client settings：

①. Start MuLogin, click on the ‘Browser List’ on the left side, and then click on ‘Add Browser’.②. Go to the ‘Basic Configuration’ page.
③. Scroll down, find the ‘Proxy Settings’ option, and select either HTTP or SOCKS5.”
④. IP Address: 127.0.0.1

Port: According to the corresponding port forwarded in the YiLu settings (e.g., 5500, 5501, etc.)

Login User and Login Password: Leave these fields blank.

⑤. Click “Test Proxy” to check if the connection is successful.
⑥. If a green check mark is displayed, it indicates a successful connection. Click “Save Settings.”

Note: If you need to create multiple lines, repeat the above steps accordingly.

6.Username + Password Form (Only applicable to dynamic types of IPs: dynamic residential IP, dynamic mobile IP, and dynamic data center IP. Not applicable to static IP types because they do not have a username and password; therefore, static IPs can only use the port forwarding method.)
1. Select the IP type and click on the “Dynamic Residential IP/Dynamic Mobile IP/Dynamic Data Center IP” option.
2. Choose the desired country, state, and city (Dynamic Data Center IP does not currently support selection of state and city).

3. Select the format for generating the IP，such as “IP:Port:Username:password.Username: password@IP: Port.

4. Specify the number of IPs you want to generate.

5. Click the “Extract” button to obtain the IP information.
6 Copy the generated IP:Port:Username:password，and then paste it into the MuLogin profile. ①. You can click “Copy to Clipboard” to save the IP information locally for bulk uploading to the MuLogin.
Note:You can also extract IP information from the “API Adder: user_get_ip_list” in YiLu’s “Settings” interface.

7. Open the MuLogin client:

①. Start the MuLogin, click on ‘Browser List’ on the left side, and then click on ‘Add Browser’

②. Go to the ‘Basic Configuration’ page.

③. “Scroll down, find the ‘Proxy Settings’ option, and choose either HTTP or SOCKS5.
④. IP Address: Paste the extracted proxy host IP.
Port: Paste the extracted port.
Username: Paste the extracted IP username.
Password: Paste the extracted IP password.
⑤ “Click ‘Check the network’ to test if the proxy is connected successfully.”
⑥Once it shows a green connection success, click ‘Save’ below to create the window.”

“Note: To create multiple lines, repeat the above steps accordingly.”