Configure YiLu Proxy in AdsPower Fingerprint Browser

I. Open the YILU Official Website

Yilu Proxy

Download the YILU Client:

Yilu Proxy Installation Package

Note 1: When downloading or using the Yilu client, be sure to turn off the firewall.

Note 2: Save the Yilu client download on your computer in a location other than the desktop, such as drive D or E.

Note 3: Be sure to extract the installation package in the drive where it was downloaded. Double-click the YiluProxy.exe file to open the Yilu client.

Note 4: For ease of use, you can create a shortcut to the Yilu client on the desktop after extraction.

2.Creating a Yilu Account
a. In the bottom right corner of the Yilu client, select your preferred language. Currently, only Chinese and English are supported. Click to switch between languages as desired.
b. After selecting the language, please click “Create New Account.” In the pop-up window, fill in an email address that can receive SMS messages, a password, and an invitation code (optional). Then, click “Create Account.”
c. After registering for a Yilu account, enter your username (registered email) and password, and click “Secure Login” to begin your “Yilu journey.”

3. Open the YILU client, click on [Program], and add Edge Browser or Google Chrome, etc.
The following example uses adding the Edge browser. There are two methods to add it:

Method 1: Drag the Edge browser directly into the software program interface. Move the cursor over the Edge browser program, press and hold the left mouse button, and drag the software directly into the [Program] interface.

Method 2: Click on the “Add Program” button (on the right side) in the [Program] interface of the client, then select the Edge browser software, and finally click “Save.”

4.Settings
① Open the “Settings” page of the YiLu client.
 ② Proxy port: You can choose random or custom.
 ③ Forwarding port: Set the port range according to your needs, for example, between 5500 and 5510. This allows multiple ports to forward simultaneously, with each port able to forward one IP.
④ Listening address: Select 127.0.0.1.
⑤ Use proxy IP for more than 24 hours: Choose according to your needs.
 ⑥ Select “YiLu Portable Proxy Engine.”
 ⑦ Proxy rules: Use the default selection.

Only proxy applications in the YiLu program tab, other traffic through the local network. Intercept UDP non-DNS request data (recommended to check, can prevent browser from leaking the real IP).
⑧ After ensuring steps 1-7 are correct, don’t forget to save the settings.

5.Port Forwarding (Applicable to All IP Types: Shared Static IP, Dedicated Static Datacenter IP, Dedicated Static Residential IP, Dynamic Residential IP, Dynamic Mobile IP, and Dynamic Datacenter IP)
In the YILU client, follow these 4 steps：

(1)Select the IP type.

(2)After selecting an IP address,

(3)Right-click and select “Forward Port to Proxy.”

(4)Select the desired port.
Note a: Each port can only be assigned one IP address, but you can change the IP for that port at any time.

Note b: After setting up, you can view the specific IP information for each port in the “Port Forwarding List.”

Note c: “Used” indicates that the port has an assigned IP address, while “Free” indicates that the port is currently unassigned and available.

Note d: The setup method for port forwarding is the same for both static and dynamic IPs.

6. AdsPower Client Setup:：

1. Start AdsPower and scroll down to find the ” Proxy Configuration” section.
2. In the proxy type, select: Socks5 or HTTP.
3. For Host, enter: 127.0.0.1. For Port, enter the corresponding port forwarded in YiLu settings (e.g., 5500, 5501, etc.); Proxy Username: Leave blank; Proxy Password: Leave blank. Click “Check Proxy” to test if the proxy is connected successfully.
4. If the connection is successful and shows green, click “OK” to create the window.

Note:To create multiple lines for use, repeat the above steps as needed.

7.Username + Password Method (Applicable only to Dynamic IP Types: Dynamic Residential IP, Dynamic Mobile IP, and Dynamic Datacenter IP. Static IP types are not applicable because they do not have usernames and passwords. Therefore, static IPs can only be used in port forwarding mode.)

(1)Click on the “Dynamic Residential IP/Dynamic Mobile IP/Dynamic Datacenter IP” option.

(2)Select the country, state, and city you want (Dynamic Datacenter IP does not support selecting state and city for now).
(3)Select the format for generating the IP，such as “IP:Port:Username:password: Username: password@IP: Port.

(4)Specify the number of IPs you want to generate.

(5)Click the “Extract” button to obtain the IP information.

(6)Copy the generated IP:Port:Username:password:, then paste it into the AdsPower browser profile.

①. You can click “Copy to Clipboard” to save the IP information locally for bulk uploading to the AdsPower browser.
②. You can also extract IP information from the “API Adder: user_get_ip_list” in YiLu’s “Settings” interface.
(7)Open the AdsPower client：

• Start AdsPower and scroll down to find the “new profile” section.
• In the proxy type, select: Socks5 or HTTP
• Host:Port: Copy the extracted IP:Port
  Proxy Account: Copy the extracted IP username.
   Proxy Password: Copy the extracted IP password.
   “Check Proxy” to test if the proxy connection is successful.

• After it shows a green successful connection, click “OK” to create the window.。

Note: If you need to create multiple lines, repeat the above steps accordingly.